All On 4 Plus® restorations are created to handle the forces involved in speaking, chewing and everyday function. However, like any long-term dental restoration, the prosthetic teeth and supporting components are exposed to ongoing mechanical stress.

Biomechanical wear and tear can affect different parts of the restoration, including the prosthesis (bridge), screws, titanium frameworks and implant components. In some cases this may lead to wear, small fractures, chipping, loosening of screws or gradual changes to the bite.

Several factors can influence how much stress is placed on the restoration. These may include teeth grinding, clenching, chewing very hard foods, bite force, general oral habits and long-term daily function.

Regular maintenance appointments are an important part of monitoring the condition of the bridge and implant components over time. During these visits, clinicians may assess bite balance, check for signs of wear, tighten components if required and identify small problems before they become more significant.

The materials used in All On 4 Plus® restorations are selected for strength and durability, but long-term maintenance is still considered a normal part of caring for implant-supported teeth.

Understanding the factors that contribute to this process can help patients care for their teeth and recognise when professional maintenance may be needed.

How to watch: press Play video and turn your sound up. Subtitles (words on screen) are switched on. To pause, press the video. For a bigger picture, press the full screen button in the bottom-right corner of the video.

How long can I expect my teeth to last?

Everyone is different but Immediate Final Teeth™ usually last anywhere from 5-7 years. However it can be longer for some people. Below are some reasons why your teeth could develop wear and tear. 

What Causes Wear and Tear?

1. Everyday Biting and Chewing

Everyday activities place repeated forces on your replacement teeth. Over time, these forces can contribute to surface wear, small chips or changes to the biting surfaces. Common examples include:

  • Chewing meals throughout the day
  • Biting into harder foods
  • Repeated pressure on particular teeth due to the way your bite comes together

2. Teeth Grinding and Clenching

Bruxism refers to grinding or clenching your teeth, often during sleep. This can place additional pressure on the prosthetic teeth, screws and supporting components. Signs that may warrant assessment include unusual wear, chipped teeth, jaw discomfort or changes in how your teeth meet. Your clinician can assess these signs and discuss whether additional measures are appropriate.

3. Food Choices and Eating Habits

Certain foods can place greater demands on your replacement teeth, particularly when bitten directly with the front teeth. Your clinician's dietary instructions are especially important during the initial healing period, when the implants are integrating with the jawbone.

Hard foods, such as ice or hard lollies
May contribute to chips or fractures
Sticky foods, such as toffee
Can place additional stress on the restoration
Tough or chewy foods
May increase biting forces
Everyday softer foods
Generally, place less demand on the teeth

4. The Material Used for Your Teeth

All On 4 Plus® restorations may be made using different materials, including acrylic, PMMA, hybrid glass ceramic or zirconia, depending on the treatment plan.

Each material has different characteristics in terms of strength, surface wear, repairability and maintenance requirements. No material is entirely immune to damage, and the most appropriate option depends on individual clinical factors.

Upper and lower acrylic Immediate Final Teeth, showing the metal fittings on top
Acrylic teeth are more of a lightweight material which can be repaired easily- but can be prone to chips and breakages.
Zirconia Immediate Final Teeth from behind, showing the white teeth, pink gum and the gold-coloured frame underneath
Zirconia teeth are more durable but are heavy in the mouth. They are very strong and usually don't have breakages. This material is a good option for severe bruxers or those with a heavy bite that can't be resolved with other alternatives.

5. Your Bite and the Distribution of Forces

When your teeth meet unevenly, certain areas of the restoration may experience greater pressure than others. Over time, this can contribute to localised wear or damage.

Regular clinical reviews allow your clinician to assess your bite and identify areas that may require adjustment.

6. Cleaning and Ongoing Maintenance

Plaque can accumulate around the bridge and gumline if cleaning is inadequate. Although plaque does not directly cause the same type of mechanical wear as grinding, it can contribute to gum inflammation and problems affecting the supporting tissues. Helpful maintenance habits include:

Cleaning around your bridge and beneath as instructed
Use the cleaning tools recommended by us- eg. X-floss, interdental toothbrushes, waterpik ( if approved to use)
Attend your 4-6 monthly professional cleaning maintenance appointments
Report any changes you notice to your dentist- eg. looseness, chips, unusual noises or feelings

A free 25-minute video with Dr Alex Fibishenko

Your New Smile, Explained

  • Presented by Dr Alex Fibishenko, creator of All On 4 Plus®
  • The procedure, costs and risks explained
  • Watch privately, anytime
Watch the free video
The All On 4 Plus treatment video

Tips for Making Your All On 4 Plus® Teeth Last Longer

Here’s how to make your Immediate Final Teeth™ last as long as possible with minimal wear and tear:

  • Choosing the right material for youAsk your dentist to recommend the ideal material for the arch and teeth based on your individual case. And choose wisely because each material has its pros and cons when it comes to durability. For example, zirconia is highly wear-resistant but also difficult to repair. And porcelain is durable but prone to chipping.
  • Maintain excellent oral hygienelthough All On 4 Plus® teeth are prosthetic, plaque and tartar can still accumulate, especially beneath the bridge and around the implants. So, clean the teeth and gums twice daily, paying special attention to the area under the bridge and surrounding the implants.
  • Protect your teeth from excessive forcesExcessive biting forces can cause the teeth to chip or fracture prematurely. Avoid that by sticking to the dentist-recommended diet and eating habits. If you clench or grind your teeth, it might be a good idea to use a night guard or get anti-clenching injections. In case of severe bruxism, upgrade to a bridge made of stronger material, such as zirconia.
  • Attend regular dental check-upsAfter fixing the final teeth, your dentist will recommend regular check-ups every 3-6 months. These visits are essential for maintaining the new teeth and stopping problems before they arise.
  • Look out for early signs of damageRecognise and report the early signs of wear and damage. Bad breath, mild pain, swelling, staining, or a small chip can point to a developing problem. It’s best to get these checked out early before they become major complications.

Extend the Lifespan of Your All On 4 Plus® with Professional Touch-Ups

A stain, chip, crack, or fracture on your Immediate Final Teeth™ does not mean that you have to get a new bridge. A quick, simple fix can restore your All On 4 Plus® teeth to their former sparkly and flawless glory.

We can fix chips and breakages at our on-site laboratories. Book a consultation today to learn more about Immediate Final Teeth™ restoration and care.

Patient story index

Frequently asked questions

Read below common questions asked about biomechanical wear and tear.

What is biomechanical wear and tear?

Biomechanical wear and tear refers to the physical forces placed on implants, prosthetic teeth and supporting components through normal daily use over time.

Can All On 4 Plus® teeth wear down over time?

Yes. Although the materials used are designed for durability, prosthetic teeth and components may still experience wear, chipping or small fractures over many years of use.

What can increase wear on the restoration?

Factors such as teeth grinding, clenching, chewing hard foods, uneven bite pressure and certain oral habits may place additional stress on the restoration.

Can screws or components loosen?

In some cases, screws or prosthetic components may loosen over time due to repeated bite forces. Regular maintenance appointments help identify and manage these issues early.

Does teeth grinding affect implant restorations?

Yes. Bruxism, or teeth grinding, can place additional pressure on implants and prosthetic teeth. Some patients may be advised to wear a custom-made night guard to help reduce excessive forces during sleep or to get anti-clenching injections in their jaw to help soften their bite.

How are wear and tear issues managed?

Management may include professional adjustments, polishing, replacing worn components, tightening screws or repairing sections of the prosthetic if required or for stronger biting forces a night guard or anti-clenching injections might be recommended.

Are maintenance appointments important?

Yes. Ongoing professional maintenance allows clinicians to monitor implant stability, assess bite forces and identify signs of wear before larger problems develop. 

Which parts of an All On 4 Plus® restoration can be affected by wear and tear?

Biomechanical wear can affect prosthetic teeth, screws, titanium frameworks and implant components.

Can biomechanical wear affect my bite?

Yes. Ongoing mechanical stress can contribute to gradual changes in the bite over time.

Is some maintenance expected over time?

Yes. Implant-supported teeth and their supporting components can experience normal wear over time, so maintenance, adjustment or replacement may occasionally be required.

Your next step

Wondering if All On 4 Plus® could suit you?

Start with the free patient video: the procedure, costs, risks and recovery, explained by Dr Alex Fibishenko. When you are ready, book a consultation to find out what is possible for you.